*Image may differ with actual product's layout, color, size & dimension. No claim will be accepted for image mismatch.
Product Id: 55.01.269.102
Delivery time?
Quick Overview
Brand - Thermaltake
Brand - Thermaltake, Model - Thermaltake Toughpower GF1, Series - Toughpower Series, PSU Category - Full Modular, Type - ATX, Maximum Power - 850 Watt, Input Voltage - 100V - 240V, Input Frequency Range - 50Hz - 60Hz, Input Current - 12A, Fan Size - 140mm, Efficiency - 80 Plus Gold Certified, 80 Plus Rating - 80 Plus Gold Certified, Protection - OCP, OVP, UVP, OPP, SCP, OTP, Over Voltage Protection (OVP) - Yes, Over Power Protection (OPP) - Yes, Over Current Protection (OCP) - Yes, Over Temperature Protection (OTP) - Yes, Short Circuit Protection (SCP) - Yes, Under Voltage Protection (UVP) - Yes, ATX Main Connectors - 1, EPS Connectors - 2, PCIe Connectors - 6, SATA Power Connectors - 12, 4-Pin Peripheral Connectors - 4, Floppy Connectors - 1, PFC (Power Factor Correction) - Active PFC, Peak Output Capacity - 1020W, Power Good Signal - 100-500 msec, Hold Up Time - > 16msec at 100% of full load, Operating Temperature - 0 - +50 degree C, Operating Humidity - 20% to 90%,non-condensing, Storage Temperature - -20 degree C - + 70 degree C, Storage Humidity - 5% to 95%, non-condensing, MTBF - 120,000 hours, Form Factor - ATX, Dimension (W/H/D) - 150 x 86 x 160mm, Color - Black, Regulatory / Safety Approval - CE/cTUVus/TUV SUD/FCC/BSMI/EAC, Others - COOLING SYSTEM: 14cm hydraulic bearing fan, Feature: 80 PLUS Gold certified fully modular PSU with Hydraulic Bearing fan, TT Premium Edition, Zero Cable Platform, Ultra Quiet 140mm Hydraulic Bearing Fan, 30mV Low Ripple Noise, Fully Modular Low-Profile Flat Cable, High Amperage Single +12V Rail, 80 PLUS Gold Certified and Intel C6/C7 States Ready, Part No - PS-TPD-0850FNFAGE-1, Warranty - 10 Years, Country of Origin - Taiwan, Made in/ Assemble - China
Power Supply Units [PSUs] are often overlooked during a PC build despite its crucial part in determining the reliability of the entire system. All your PC components depend on PSU for power. Even if you’re on a tight budget, you don’t want to make any compromises when it comes to the power supply. We’re here to discuss factors you need to consider before purchasing the PSU for your rig.
Factors need to be considered before purchasing a PSU -
Wattage Requirement: There is no point in buying a PSU with way more potential power than you’ll ever use. A PSU calculator web page or software can be handy in finding a rough estimation about the wattage requirement of your build. However, it is not recommended purchasing a PSU just above your system's power needs. A PSU delivers maximum efficiency with 40 to 60 percent load. Besides, the performance of a PSU declines with time. So, you better opt for a PSU capable of taking you through your next few upgrades for multiple years.
Physical Dimensions of the PC Case: You must buy a PSU that fits inside your PC case. Higher-wattage PSUs tend to be a bit longer [compared to typical 5.5 inch PSUs] to house the additional power components they need. This may create issues with cable routing or even with placing other internal components inside the case. So, it is a must to go for a PSU compatible with your PC case.
Type and Number of Connectors: Different PSUs come with different types of power connectors, including 20/24-pin power, 4-pin ATX12V, 4-pin Molex, floppy, SATA, 6-pin PCI-Express graphics and 8-pin PCI-Express graphics. You must get a power supply with connectors your PC components required. If you don’t find required connectors in a PSU within your budget, check what cable adaptors the PSU includes to extenuate the problem.
Modular or Non-Modular: If you have limited space in your case, it’s worth paying extra for a modular power supply. A modular PSU let you plug in the power cables you need and leave the extra ones. This facility will help reducing cable clutter that can hinder airflow and heat up the atmosphere inside the case.