Product Id: 55.01.470.24
Quick OverviewCorsair HX1200i ATX 1200 Watt 80 Plus Platinum Certified Full Modular Power Supply Unit (PSU) #CP-9020070-UK
|Type||ATX12V v2.4 and EPS 2.92|
|Fan Size||Yes, 140mm|
|Input Current||15A - 7.5A|
|Input Voltage||100 - 240V|
|Input Frequency Range||47Hz - 63Hz|
|Zero RPM Fan Mode||Yes|
|Over Voltage Protection||Yes|
|Maximum Power||1200 Watt|
|SATA Power Connectors||12|
|ATX Main Connectors||1|
|Efficiency||80 Plus Platinum Certified|
|Dimensions||150 x 86 x 200mm|
HXi Series power supplies give you extremely tight voltage control, virtually silent operation, and a fully modular cable set. They’re a great choice for high performance PCs where reliability is essential.
HXi Series power supplies give you extremely tight voltage control, virtually silent operation, and a fully modular cable set. With all Japanese 105°C capacitors, they’re a great choice for high performance PCs where reliability is essential. 80 PLUS Platinum efficiency reduces operating cost and excess heat, and together with Zero RPM Fan Mode technology, gives you virtually silent operation.
With CORSAIR iCUE support, you can monitor power supply performance, toggle single rail or multi rail mode, and control fan speed directly from your desktop. And, the fully modular, low profile cable set makes builds and upgrades easy, with clean, great-looking results.
80 PLUS Platinum efficiency and Zero RPM Fan Mode mean that at low to medium loads, the fan doesn’t spin at all. And when you do push the HXi hard, the thermally controlled fan spins only as fast as it needs to.
But that’s not all. It’s quieter than most PSUs when the fan’s not spinning, too. The HXi is built with capacitors and other internal components specially selected to reduce coil whine and other electronic noise.
The fully modular, low-profile cable set allows for quick and easy installation and great-looking builds. The fan self-test switch lets you quickly confirm operation before you even attach cables to your motherboard.
Model - Corsair HX1200i, Type - ATX12V v2.4 and EPS 2.92, PSU Category - Fully Modular, Series - HXi Series, Maximum Power - 1200 Watt, Input Voltage - 100 - 240V, Input Frequency Range - 47Hz - 63Hz, Input Current - 15A - 7.5A, Over Voltage Protection - Yes, Efficiency - 80 Plus Platinum Certified, Fan Size - Yes, 140mm, Zero RPM Fan Mode - Yes, ATX Main Connectors - 1, EPS Connectors - 2, PCIe Connectors - 8, SATA Power Connectors - 12, 4-Pin Peripheral Connectors - 12, Floppy Connectors - 2, MTBF - 100,000 hours, Dimension( W/H/D) - 150 x 86 x 200mm, Warranty - 10 years, Part No - CP-9020070-UK
Power Supply Units [PSUs] are often overlooked during a PC build despite its crucial part in determining the reliability of the entire system. All your PC components depend on PSU for power. Even if you’re on a tight budget, you don’t want to make any compromises when it comes to the power supply. We’re here to discuss factors you need to consider before purchasing the PSU for your rig.
Factors need to be considered before purchasing a PSU -
There is no point in buying a PSU with way more potential power than you’ll ever use. A PSU calculator web page or software can be handy in finding a rough estimation about the wattage requirement of your build. However, it is not recommended purchasing a PSU just above your system's power needs. A PSU delivers maximum efficiency with 40 to 60 percent load. Besides, the performance of a PSU declines with time. So, you better opt for a PSU capable of taking you through your next few upgrades for multiple years.
You must buy a PSU that fits inside your PC case. Higher-wattage PSUs tend to be a bit longer [compared to typical 5.5 inch PSUs] to house the additional power components they need. This may create issues with cable routing or even with placing other internal components inside the case. So, it is a must to go for a PSU compatible with your PC case.
Different PSUs come with different types of power connectors, including 20/24-pin power, 4-pin ATX12V, 4-pin Molex, floppy, SATA, 6-pin PCI-Express graphics and 8-pin PCI-Express graphics. You must get a power supply with connectors your PC components required. If you don’t find required connectors in a PSU within your budget, check what cable adaptors the PSU includes to extenuate the problem.
If you have limited space in your case, it’s worth paying extra for a modular power supply. A modular PSU let you plug in the power cables you need and leave the extra ones. This facility will help reducing cable clutter that can hinder airflow and heat up the atmosphere inside the case.